First you need to switch the power on at the Mains Switches. Then you need to switch the Power Switch on.
Auto-Start Operation
When you have finished make sure the power is switched off and the box is covered up.
First you need to switch the power on at the Mains Switches. Then you need to switch the Power Switch on.
The LED P will confirm the power is on.
All you need to do is press the start button S. Now if you wish to delay the start, i.e. have time to get to your boat you need to set the delay switch D to the time delay you need, it’s calibrated in minutes. So set the delay with D and then press button S.
The LEDs L will show which light is on.
If someone is manning the Box they can press button H to sound the horn to let them know they have finished the race.
The switches M are manual switches for the lights when the Officer of the Day wishes to be in complete control.
The operating instructions I are on the desk.
The reset button is R. This can be used when things have gone wrong to start again or at a general recall
Do not touch anything if you are unsure or it doesn’t work contact John Wood.
Cover the switches up after you have finished, this is important, and switch the power off
The Genius who sorted it all out and made the controls - John Wood - Hinas Moon